That is to say, the oil unloading platform can only be allowed to unload oil after the inspection number certificate is consistent. If the oil unloading platform attendant finds that the lead seal is inconsistent or incomplete, he should notify the driver or contact the Production and Environmental Protection Department for confirmation. In addition, after the oil transport vehicle weighs the oil loading platform for the first time, he should ask the oil unloading platform attendant to supervise the cutting of clear water at the site, and fill in the cutting of water after confirming that there is no clear water, It is possible to order the tank truck to weigh back, and the duty personnel of the oil unloading platform should be on site to check the quality of the oil unloaded at any time during the unloading process, including water, impurities, etc. In order to find problems and stop unloading oil in time, and it is necessary to report, and it is also necessary for the driver to be responsible for the iron wire, gloves The plastic paper and other sundries should be cleaned up and put into the designated position of the oil unloading platform. In addition, after the oil unloading is completed, the driver must put the lead seal on the vehicle into the designated position of the oil unloading platform management personnel. It is strictly prohibited to throw it away at will. Otherwise, the oil unloading platform management personnel will come and have the right to refuse to go through the relevant procedures and punish the driver involved.